shipping

Within 24-48 h by UPS or GLS courier company

Delivery time: 4-5 days within the EU

 
Payment

  • Paypal
  • Bank transfer
  • Pay on delivery ( COD )
 
Delivery

 

Parcels up to 50 kg are sent by UPS or GLS

Shipments above 70 kg are sent on a pallet by Raben company

 
Hydraulic log splitter HS_230/800
2075.00 €

Hydraulic log splitter HS_230/800

Hydraulic log splitter with an engine capacity of 800 ccm and 230 mm cone

The supporting structure is made of sheet metal 20 mm thick and additionally reinforced from the inside.

The log splitter back consists of two pieces of sheet metal 15 mm thick each. One is permanently welded to the whole structure while the other is screwed with M20 bolts. Owing to this solution, it is possible to weld any kind of mounting to excavator, loader, tractor, etc on one's own.

It is possible to perform such mounting, just give us the kind of the mounting or send drawings.

Very strong and stable hydraulic motor of 34 kW and torque of 1880 Nm

The shaft is mounted on a needle bearing, which allows for the transfer of high longitudinal and transverse stresses, and is in addition supported with the outer self-aligning bearing.

 

Hydraulic motor shaft [mm]

Cylindrical Ø50

Absorption capacity [cm3 / rev]

801

Maximum revolution [rpm]

250

Maximum torque [Nm]

1880

Maximum power [kW]

34

Maximum operating pressure [bar]

160

Maximum instantaneous pressure [bar]

180

Transmission width [mm]

280

Transmission height [mm]

300

Transmission length [mm]

320

Total weight [kg]

180

 

 

Cone with the diameter of 230 mm and a deep double thread with a 12 mm pitch per rotation ensures trouble-free operation in any kind of wood. Owing to the proper placing of the thread, cones are suitable in the dry wood where cones with a thin and shallow thread are not able to be screwed in.

The cone is made of solid material (not iron cast) C45 and replaceable tip is addidtionally subjected to heat treatment which increases its wear resistance.

The tip is mounted with a groove and also fastened with M14 hardened bolt which makes operation in two directions possible 

We are the direct manufacturer of cones which are applied in this type of machines around the world; our cones have been exported  to countries such as England, Austria, Germany, the USA, Israel, Japan for many years

The set includes two hydraulic lines with high capacity and connectors to the hydraulic motor

Log splitters are sent on pallets secured properly by Raben company

Cost: EUR 50

If you have any questions, please contact us.

If you want to build such a log splitter or another machine by yourself, we can manufacture for you  every part according to the drawings. We have CNC machines such as lathe, milling machine and laser for metal sheet.

We also invite people willing to cooperate in trade in our parts and machines.

shipping

Within 24-48 h by UPS or GLS courier company

Delivery time: 4-5 days within the EU

 
Payment

  • Paypal
  • Bank transfer
  • Pay on delivery ( COD )
 
Delivery

 

Parcels up to 50 kg are sent by UPS or GLS

Shipments above 70 kg are sent on a pallet by Raben company